VMware Workstation 17 Nested Home Lab Part 7: Setting up vSphere Environment

Posted on Updated on

In Part 7 we start the setup of our vSphere environment and get it ready for the vSAN ESA Install. The steps we’ll cover are as follows – Power On all the systems, Ensure NTP, DNS, and network connectivity are working, Add License Keys, Create Datacenter and Cluster, Add Hosts to the cluster, Validate Host NTP Settings, and finally Suppress Shell and SSH Warnings.

#Optane #IntelXeon #Xeon #vExpert #VMware #Cloud #datacenter

This entry was posted in Other.

VMware Workstation 17 Nested Home Lab Part 6: Installation of ESXi 8 Hosts

Posted on Updated on

We’ve turned the corner on our series and in Part 6 we install ESXi 8 on to our Workstation 17 deployment. Additionally, I cover a few tips and tricks for getting the install to go smoothly!


#Optane #IntelXeon #Xeon #vExpert #VMware #Cloud #datacenter


This entry was posted in Other.

VMware Workstation 17 Nested Home Lab Part 5: Installation of VCSA 8

Posted on Updated on

In Part 5, I show you all the tips you’ll need to successfully install VCSA 8 on to Workstation 17.

#Optane #IntelXeon #Xeon #vExpert #VMware #Cloud #DataCenter

This entry was posted in Other.

VMware Workstation 17 Nested Home Lab Part 4A/B

Posted on Updated on

In Part 4A, I cover installing Windows 2022 Server, setting up AD, and DNS. Part B we complete the installation of Windows 2022 Server services (NTP, DHCP, RAS) and validate them. Towards the end of the video I make some adjustments to the DNS server allowing it to work properly.

#Optane #IntelXeon #Xeon #vExpert #VMware #Cloud #DataCenter

This entry was posted in Other.

VMware Workstation 17 Nested Home Lab Part 3

Posted on Updated on

In Part 3, I go over some OS Clean Up items, reviewing our network plan, and setting up Workstation 17 for the networks we’ll need. As motioned in the video check out  @VMwareTAMLab  for more information around alternative Windows AD/DS services.

#Optane #IntelXeon #Xeon #vExpert #VMware #Cloud #DataCenter

This entry was posted in Other.

VMware Workstation 17 Nested Home Lab Part 2

Posted on Updated on

In Part 2, I go into a physical hardware overview, show how to enable VT-X and VT-D, installation of Windows 11 (which includes a trick to disable the TPM requirement), install of Workstation 17, and review common issues when Hyper V is enabled. At the end of this video #windows11 and #workstation 17 are installed and operational. Coming up in Part 3 we’ll build out or Workstations Networks, start building the Windows 2022 server with AD, DNS, RAS, DHCP, and other services.

#Optane #IntelXeon #Xeon #vExpert #VMware #Cloud #datacenter

This entry was posted in ESXi, Home Lab, Storage, vmware, VSAN, Workstation.

VMware Workstation 17 Nested Home Lab Part 1

Posted on Updated on

In Part 1, I go into some of the Goals, Requirements, and a bit of planning around developing your own Nested Workstation environment by using mine an an example deployment.

Links in the video:

#Optane #IntelXeon #Xeon #vExpert #VMware #Cloud #DataCenter

This entry was posted in Other.

VMware Workstation 17 Nested vSAN ESA Overview

Posted on Updated on

In this high level video I give an overview of my #VMware #workstation running 3 x nested ESXi 8 Hosts, vSAN ESA, VCSA, and a Windows 2022 AD. Additionally, I show some early performance results using HCI Bench.

I got some great feedback from my subscribers after posting this video. They were asking for a more detailed series around this build. You can find this 8 Part Series under Best of VMX > ‘VMware Workstation Generation 8 : Complete Software Build Series’.

For more information around my VMware Workstation Generation 8 Build check out my latest BOM here

This entry was posted in ESXi, Home Lab, Storage, vCenter Server, Virtual SAN, vmware, VSAN, Workstation and tagged , .

Home Lab Generation 8 Parts List (Part 2)

Posted on Updated on

Today I’m releasing the parts that I plan to use for my Generation 8 Home Lab! I’ll be using three Dell T7820 Workstations for my ESXi Hosts. In this video I go through the BOM (Bill of Materials) or the parts I selected to build out my systems.

NOTE: Though I’ve installed ESXi 8 on these hosts, this in no way is my complete solution. For now ESXi 8 seems to run without issue but I have not tested it with vSAN ESA yet. I’ll be releasing more videos around settings and networking shortly.

UPDATE: 03/11/23 All parts seem to be working well though I’ve had a string of bad QLogic QL45212HLCU-DE 2 Port 25Gbe cards from eBay. After receiving 2 bad cards, I’ve decided to buy a new card from Server Supply. I’ve installed this card and its working fine. I recommend buying this card new vs. used. https://www.serversupply.com/NETWORKING/NETWORK%20ADAPTER/25%20GIGABIT/DELL/0NJFX_310672.htm

More and updated information can be found here – https://vmexplorer.com/home-lab-bom/ #intelxeon #optane #vmware #vexpert #cloud

This entry was posted in Other.

Home Lab Generation 7: Archive Page

Posted on Updated on

Today I’m retiring my Generation 7 Home lab as my Generation 8 lab will be posted in my Home Lab BOM section very soon. My Gen 7 Home Lab was a vSphere and vSAN 7 All Flash cluster and below was its final configuration. Some of the items below I’ll be reusing in Generation 8, and some of the items I will be selling off.

Overview:

My Gen 7 Home Lab is based on vSphere 7 (VCSA, ESXi, and vSAN), NSX-T, and vRealize Suite. Additionally, I use it for vSphere Nesting and Testing. It contains 3 x ESXi Hosts, 1 x Windows 10 Workstation,  4 x Cisco Switches, 2 x MikroTik 10gbe Switch, 3 x APC UPS, 1 x Synology 1621+, and 1 x Asustor Lockerstor 10.  Read further below for an itemized list.

NOTE: My Home Lab Generation 7 design will not fully work with vSphere 8.  Though I could force the install of vSphere 8 I have decided to upgrade my home lab. Please see my Home Lab BOM for more inforamtion.

HL7
HL-stats
perhost-storage
perhost-nic

ESXi Hosts: (Total cost for one host ~$1325 | Unless noted, the items this area are per host)

NOTE: This Home Lab Generation 7 has worked well for me with vSphere 7 BUT most likely it will need to be updated for vSphere 8 due to pCPU discontinuation. Please see this KB for further information https://kb.vmware.com/s/article/82794

  • Case:
  • Motherboard:
  • CPU: (These CPUs work on vSphere 7, but chances are they will NOT work with vSphere 8)
    • 2 x Xeon E5-2640 v2 8 Cores / 16 HT (Ebay $30 each)
  • CPU Cooler or Heatsink: (Bracket required to fit narrow 2011 cooler mounts)
  • RAM:
    • 256GB DDR3 ECC RAM (Mostly from Ebay | each host has a different brand)
      • 16 x Host1: ELPIDA 16GB 2Rx4 PC3L-10600R-09-11-E2 Registered ECC Memory DDR3
      • 16 x Host 2: SAMSUNG M393B2K70CM0-YF8 16gb Pc3-8500r 1066mhz 1.35v Quad Rank X4 Ecc Registered Cl7 Ddr3 Sdram 240-pin Rdimm Memory Module For Server
      • 16 x Host 3: HYNIX HMT42GR7BMR4C-G7 16gb Pc3-8500r 1066mhz Cl7 Quad Rank X4 Registered Ecc Ddr3 Sdram 240-pin Rdimm Memory Module For Server
  • Disks:
    • 1 x Dual M.2 PCIe Adapter Card for NVMe/SATA SSD (Amazon $15)
      • 1 x 512GB NVMe SSD | vSAN Cache | Sabrent Rocket 512 (B&H $69)
      • 1 x 240GB M.2 SSD | Boot Disk | Kingston A400 (Amazon $35)
    • 2 x Supermicro AOC-SLG3-2M2 PCIe NVMe (Amazon $55)
      • 2 x 2TB NVMe SSD | vSAN Capacity | Sabrent Rocket 2TB (Amazon $199)
    • 1 x 2TB SATA | Extra Space | Hitachi (Ebay $50)
  • Network:
    • Motherboard Integrated i350 1gbe 4 Port
    • 1 x MellanoxConnectX3 Dual Port (HP INFINIBAND 4X DDR PCI-E HCA CARD 452372-001)
  • Power Supply:
    • Antec Earthwatts 500-700 Watts (Adapters needed to support case and motherboard connections)
      • Adapter: Dual 8(4+4) Pin Male for Motherboard Power Adapter Cable (Amazon $11)
      • Adapter: LP4 Molex Male to ATX 4 pin Male Auxiliary (Amazon $11)
      • Power Supply Extension Cable: StarTech.com 8in 24 Pin ATX 2.01 Power Extension Cable (Amazon $9)

Storage (NAS):

Network:

Battery Backup UPS:

This entry was posted in Other.