HOME LAB: Guide / Info

This Page contains two sections:

1) HOME LABS: A DEFINITIVE GUIDE and 2) CURRNT HOME LAB Build Information (further below)

Section 1: HOME LABS: A DEFINITIVE GUIDE

For the 2020 HOME LABS: A DEFINITIVE GUIDE I was invited to present my updates to various groups.  Below are links to my slides and videos.   During these sessions I go into detail around Home lab design considerations, which is something we usually don’t think of when building a home lab. I do hope you find this information very useful. Please feel free to ask any questions or post comments…  Thanks — Enjoy!

AUG-2020 VMUG Advantage Session

MAY-2020 Cedar Park VMUG Session

MAR-2020 TAM Lab Recorded Session

Section 2: CURRNT HOME LAB Build Information

Overview:

My Gen 7 Home Lab is based on vSphere 7 (VCSA, ESXi, and vSAN) and it contains 3 x ESXi Hosts, 1 x Windows 10 Workstation,  4 x Cisco Switches, 1 x MikroTik 10gbe Switch, 2 x APC UPS.  Read further below for an itemized list.

svrs

perhostperhost-storageperhost-nic

ESXi Hosts: Unless noted, the items this area are per host

  • Case:
  • Motherboard:
  • CPU:
    • CPU: 2 x Xeon E5-2640 v2 8 Cores / 16 HT (Ebay $30 each)
    • CPU Cooler: 2 x DEEPCOOL GAMMAXX 400 (Amazon $19)
  • RAM:
    • 256GB DDR3 ECC RAM (Mostly from Ebay)
      • 16 x Host1: ELPIDA 16GB 2Rx4 PC3L-10600R-09-11-E2 Registered ECC Memory DDR3
      • 16 x Host 2: SAMSUNG M393B2K70CM0-YF8 16gb (1x16gb) Pc3-8500r 1066mhz 1.35v Quad Rank X4 Ecc Registered Cl7 Ddr3 Sdram 240-pin Rdimm Memory Module For Server
      • 16 x Host 3: HYNIX HMT42GR7BMR4C-G7 16gb (1x16gb) Pc3-8500r 1066mhz Cl7 Quad Rank X4 Registered Ecc Ddr3 Sdram 240-pin Rdimm Memory Module For Server
  • Disks:
    • 1 x 64GB USB Thumb Drive (Boot)
    • 2 x 200 SAS SSD (vSAN Cache)
    • 2 x 2TB SAS HDD (vSAN Capacity)
    • 1 x 2TB SATA (Extra Space)
  • SAS Controller:
    • 1 x IBM 5210 JBOD (Ebay)
    • CableCreation Internal Mini SAS SFF-8643 to (4) 29pin SFF-8482 (Amazon $18)
  • Network:
    • Motherboard Integrated i350 1gbe 4 Port
    • 1 x MellanoxConnectX3 Dual Port (HP INFINIBAND 4X DDR PCI-E HCA CARD 452372-001)
  • Power Supply:
    • Antec Earthwatts 500-700 Watts (Adapters needed to support case and motherboard connections)
      • Adapter: Dual 8(4+4) Pin Male for Motherboard Power Adapter Cable (Amazon $11)
      • Adapter: LP4 Molex Male to ATX 4 pin Male Auxiliary (Amazon $11)
      • Power Supply Extension Cable: StarTech.com 8in 24 Pin ATX 2.01 Power Extension Cable (Amazon $9)

Network:

  • Core VM Switches:
    • 2 x Cisco 3650 (WS-C3560CG-8TC-S 8 Gigabit Ports, 2 Uplink)
    • 2 x Cisco 2960 (WS-C2960G-8TC-L)
  • 10gbe Network:
    • 1 x MikoTik 10gbe CN309 (Used for vSAN and Replication Network)
    • 2  per host: HP 684517-001 Twinax SFP 10gbe 0.5m DAC Cable (Ebay)
    • 2 per host: MELLANOX QSFP/SFP ADAPTER 655874-B21 MAM1Q00A-QSA (Ebay)

Battery Backup UPS:

  • 2 x APC NS1250

Window 10 Workstation:


4 thoughts on “HOME LAB: Guide / Info

    BW said:
    April 12, 2016 at 11:47 pm

    Hello, I’m curious, what sort of VM performance do you get with iSCSI and your FreeNAS server with ESXi

    Like

      Matt Mancini responded:
      April 15, 2016 at 10:31 am

      I am no longer using FreeNAS as its over all performance was weak, I found the communities support unpleasant, and finally the over all product at the time I used it was quite buggy. I spent more time getting it to run vs. using it. Granted my choice of FreeNAS hardware wasn’t perfect but I used what I had. In the end I migrated my FreeNAS box to VMWare VSAN and I could not have been happier — https://vmexplorer.com/2014/08/18/vsan-the-migration-from-freenas-2/

      Like

    Darrell said:
    February 26, 2021 at 10:23 pm

    looking to build a remote gaming machine and passthrough your GPU to a virtual machine. Can this be done in a HomeLab with VMWare or am I in-over-my-head? Great presentation. I also watch all your build vids on YouTube.

    Like

      Matt Mancini responded:
      February 27, 2021 at 5:29 pm

      Hey Darrell, thanks for the comment and support. I have not tried nor have I looked into something like that. It’s been on my mind a bit but right now I’ve been doing a lot with NSX and vRNI. If I were to do something like this, I guess would start by reading the ESXi documentation and looking for blogs where folks have done this. Check out this blogger, he’s been doing home labs and GPUs too — https://tinkertry.com/vmware-vsphere-esxi-7-gpu-passthrough-ui-bug-workaround Hope this helps! Reach out anytime!

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.